LX CONNECT Specifications
General Description |
Wireless Speaker System | Active Speakers | |
Design Philosophy And Core Technology |
5.8GHz Wireless Uncompressed | Enclosure Type | Bass Reflex |
|
Technology | Transducer Complement | 2-way |
|
DAC ESS Sabre 9018 | Drive Unit | |
|
Support Music And Movie Mode | Bass Unit | 130mm Composite Fibre Cone |
|
Headphone Amplifier | Treble Unit | 25mm Microfibre Dome |
|
Support USB Upgrade | AV Shielded | No |
|
Pre Delay Setting | Rated Power Output | 60W |
|
Roon Tested | Peak Power Output | 100W |
|
Touch Control | Peak SPL | 99dB |
Analogue Input |
RCA (AUX) | Frequency Response (+/-3dB) | 58Hz – 20kHz |
Digital Input |
OPT, COAX, PC USB, Bluetooth, AV Audio | Bass Extension (-6dB) | 52Hz |
Analogue Output |
RCA Pre Out | Crossover Frequency | 3.2kHz |
Pre Amplifier (hub) |
Wireless Reception Distance | 20m | |
Input Sensitivity |
300mV (AUX IN, volume = MAX) | Cabinet Volume | 8.2L |
Input Impedance |
13K (AUX IN) | Dimensions | Speaker |
Variable Output Voltage |
0 – 3.2V | Height (on feet) | 305mm |
Output Impedance |
100 ohm | Width | 200mm |
Frequency Response | 20Hz-20kHz (+/-0.3dB) | Depth (with terminals) | (250+15)mm |
Signal-to-noise Ratio | > 100dB (AUX IN, A-weighted) | Hub | |
(S/N) | > 110dB (digital Inputs, A-weighted) | Height (on feet) | 55mm |
Total Harmonic Distortion | < 0.001% (digital sources ) | Width | 225mm |
< 0.005% (analogue sources) | Depth (with terminals) | 231mm | |
Sampling Rate | 24bit - 192kHz (OPT, COAX) | System | |
32bit - 384kHz (USB, PCM) | Carton Size | 545 x 440 x 400mm | |
2.8M for DSD64, 5.6M for DSD128, | Net Weight | 6.55kg x 2 (speakers) | |
11.2M for DSD256 (USB, DSD) | 1.75kg (hub) | ||
Digital Filters | Fast Roll-off, Slow Roll-off, Minimum Phase | Gross Weight | 17.8kg |
Finish | Walnut Pearl / Lux White / Lux Black (speakers); Black (hub) | ||
Power Requirements | 100-240Vac (50/60Hz) |